| kernel: Linux version 2.4.21 (embedix@embedix) (gcc version 3.0.4) #48
Tue Mar 22 22:03:49 JST 2005 kernel: I-O DATA DEVICE, INC. landisk3 support. kernel: On node 0 totalpages: 16384 kernel: zone(0): 16384 pages. kernel: zone(1): 0 pages. kernel: zone(2): 0 pages. kernel: Kernel command line: mem=64M console=ttySC1,9600 kernel: CPU clock: 266.01MHz kernel: Bus clock: 133.00MHz kernel: Module clock: 33.25MHz kernel: Interval = 5207 kernel: Calibrating delay loop... 266.24 BogoMIPS kernel: Memory: 62744k/65536k available (1577k kernel code, 2792k reserved, 270k data, 56k init) kernel: Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) kernel: Inode cache hash table entries: 4096 (order: 3, 32768 bytes) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes) kernel: Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) kernel: Page-cache hash table entries: 16384 (order: 4, 65536 bytes) kernel: CPU: SH7751R kernel: POSIX conformance testing by UNIFIX kernel: PCI: Using configuration type 1 kernel: SH7751R PCI: Finished initialization of the PCI controller kernel: Linux NET4.0 for Linux 2.4 kernel: Based upon Swansea University Computer Society NET3.039 kernel: Initializing RT netlink socket kernel: Allocate Area5/6 success. kernel: Julian Shutdown button driver initialized kernel: Starting kswapd kernel: Journalled Block Device driver loaded kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de). kernel: pty: 256 Unix98 ptys configured kernel: SuperH SCI(F) driver initialized kernel: ttySC0 at 0xffe00000 is a SCI kernel: ttySC1 at 0xffe80000 is a SCIF kernel: Real Time Clock Driver v1.10e kernel: RAMDISK driver initialized: 16 RAM disks of 1024K size 1024 blocksize kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx kernel: AEC6880R: IDE controller at PCI slot 00:01.0 kernel: AEC6880R: chipset revision 7 kernel: AEC6880R: not 100% native mode: will probe irqs later kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx kernel: ide0: BM-DMA at 0x4420-0x4427, BIOS settings: hda:pio, hdb:pio kernel: ide1: BM-DMA at 0x4428-0x442f, BIOS settings: hdc:pio, hdd:pio kernel: hda: SAMSUNG HA250JC, ATA DISK drive kernel: blk: queue 8c202c40, I/O limit 4095Mb (mask 0xffffffff) kernel: ide0 at 0x4400-0x4407,0x440a on irq 6 kernel: hda: attached ide-disk driver. kernel: hda: host protected area => 1 kernel: hda: 488397168 sectors (250059 MB) w/2048KiB Cache, CHS=30401/255/63, UDMA(133) kernel: ide-floppy driver 0.99.newide kernel: Partition check: kernel: hda: hda1 hda2 hda3 kernel: ide-floppy driver 0.99.newide kernel: SCSI subsystem driver Revision: 1.00 kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices kernel: NET4: Linux TCP/IP 1.0 for NET4.0 kernel: IP Protocols: ICMP, UDP, TCP kernel: IP: routing cache hash table of 512 buckets, 4Kbytes kernel: TCP: Hash tables configured (established 4096 bind 8192) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kernel: NET4: AppleTalk 0.18a for Linux NET4.0 kernel: VFS: Mounted root (ext2 filesystem) readonly. kernel: Freeing unused kernel memory: 56k freed kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended kernel: Adding Swap: 562264k swap-space (priority -1) kernel: 8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002) kernel: PCI: Enabling device Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (0000 -> 0003) kernel: eth0: RTL-8139C+ at 0xfd000000, 00:a0:b0:6d:58:63, IRQ 5 kernel: eth0: PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32 kernel: PCI: Setting latency timer of device Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ to 64 kernel: usb.c: registered new driver usbdevfs kernel: usb.c: registered new driver hub kernel: PCI: Enabling device NEC Corporation USB 2.0 (0000 -> 0002) kernel: ehci-hcd 00:02.2: NEC Corporation USB 2.0 kernel: ehci-hcd 00:02.2: irq 5, pci mem fd000100 kernel: usb.c: new USB bus registered, assigned bus number 1 kernel: PCI: 00:02.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW. kernel: PCI: 00:02.2 PCI cache line size corrected to 32. kernel: ehci-hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22 kernel: hub.c: USB hub found kernel: hub.c: 5 ports detected kernel: PCI: Enabling device NEC Corporation USB (0000 -> 0002) kernel: PCI: Setting latency timer of device NEC Corporation USB to 64 kernel: usb-ohci.c: USB OHCI at membase 0xfd001000, IRQ 7 kernel: usb-ohci.c: usb-00:02.0, NEC Corporation USB kernel: usb.c: new USB bus registered, assigned bus number 2 kernel: hub.c: USB hub found kernel: hub.c: 3 ports detected kernel: PCI: Enabling device NEC Corporation USB (#2) (0000 -> 0002) kernel: PCI: Setting latency timer of device NEC Corporation USB (#2) to 64 kernel: usb-ohci.c: USB OHCI at membase 0xfd002000, IRQ 8 kernel: usb-ohci.c: usb-00:02.1, NEC Corporation USB (#2) kernel: usb.c: new USB bus registered, assigned bus number 3 kernel: hub.c: new USB device 00:02.2-1, assigned address 2 kernel: usb.c: USB device 2 (vend/prod 0x584/0x224) is not claimed by any active driver. kernel: hub.c: USB hub found kernel: hub.c: 2 ports detected kernel: Initializing USB Mass Storage driver... kernel: usb.c: registered new driver usb-storage kernel: scsi1 : SCSI emulation for USB Mass Storage devices kernel: Vendor: RATOC Model: USB-IDE Dock Rev: 1.10 kernel: Type: Direct-Access ANSI SCSI revision: 02 kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 kernel: hub.c: new USB device 00:02.1-1, assigned address 2 kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) kernel: sda: test WP failed, assume Write Enabled kernel: sda:<4>usb.c: USB device 2 (vend/prod 0x4b8/0x5) is not claimed by any active driver. kernel: sda1 sda2 kernel: USB Mass Storage support registered. kernel: usb.c: registered new driver usblp kernel: printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid0x0005 kernel: printer.c: v0.11: USB Printer Device Class driver kernel: LED control driver initialized. kernel: Reset switch driver initialized. kernel: usb.c: deregistering driver usb-storage kernel: scsi : 1 host left. kernel: Initializing USB Mass Storage driver... kernel: usb.c: registered new driver usb-storage kernel: scsi1 : SCSI emulation for USB Mass Storage devices kernel: Vendor: RATOC Model: USB-IDE Dock Rev: 1.10 kernel: Type: Direct-Access ANSI SCSI revision: 02 kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) kernel: sda: test WP failed, assume Write Enabled kernel: sda: sda1 sda2 kernel: USB Mass Storage support registered. kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended kernel: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended |